Electronic Balance

Functions and features:

Compactness: portable and compact design;
High cost performance: having all basic functions and features of the balance;
Practicability: easiness in operation.

Technical parameters:

Maximum weighing range: 100g
Readability: 0.0001g
Linearity: ±0.0003g
Repeatability: 0.0001g
Stabilization time (typical): 8s
External calibration of weights: 100g
Tare range: 0-100g

Display and panel descriptions:

1. PRT: Data print and menu.
2. OFF: Switch off.
3. TAR: Tare
4. ON: Switch on.
5. CAL: Calibration
6. “±” Symbol of positive (over 0) and negative (below 0) weight.

Start :

1. Connect the balance to the power supply and press ON key on the panel.
2. When the balance turns on, a countdown of 30 min will be displayed showing the necessary pre-warming time for a better performance and stable state of the balance.
3. Once pre-warming time has passed it is recommended to calibrate the balance. In internal calibration models once pre-warming time has passed, the balance will automatically make calibration.
4. After calibration, the balance will enter weighing mode.
5. To turn the balance off, press OFF key on the panel and display will light off. If the balance will not be used for a long time, disconnect it from the power supply. 

Calibration 

Internal calibration models
1. Press CAL key
2. Calibration using the internal weight will be made automatically. 

If tolerance (error) after internal calibration is too high, then it is necessary to make external calibration. For this, proceed as follows:
1. Press simultaneously CAL and ON keys until F” appears at the upper side of display; after releasing the keys CAL-200 (value of the necessary weight to make external calibration) will be displayed.
2. Put the calibration weight on the pan and wait until its weight is displayed (e.g. 200.0000g).
3. Remove the weight and the balance will enter weighing mode. 

Electronic Balance link:

KZDL - 4 quick intelligent instrument for sulfur
HDL - 9 HanXian integrated set of sulfur
HDL 9W -- HanXian microcomputer type for sulfur
MLR - 8 full-automatic characters calorimeter
ZNLRY - 2000 intelligent calorimeter
MLR - 8W full-automatic microcomputer calorimeter